Wireless Motion Sensor Light - by Wireless Environmrnt - MB530 (White) (3.5"H x 1.8"W x 3"D)

Cheap Wireless Motion Sensor Light - by Wireless Environmrnt - MB530 (White) (3.5"H x 1.8"W x 3"D) Review

I bought two of these about 2 months ago, after my visiting aunt fell coming down the stairs at night. She hadn't wanted to turn on the hall light and disturb sleepers. She stepped off into air like Wile E. Coyote from the cliff, not realizing there were two more steps.

This light is great when there is no handy outlet for a nightlight. The bottom is flat enough to stand it on the side of the stair or next to a baseboard. That makes it easy to experiment with a good location without too much commitment. You can mount it with the included tape or screws, but I chose not to bother.

I put one on the floor before the first down-stair and the other one two steps from the bottom. Unless you're running, that gives plenty of time for the sensor to pick up movement and turn the lights on before the crucial first and last footsteps. Even with the turn at the landing and no other light source, the two units light the whole stairway enough to be able to navigate comfortably.

The switches for the settings are inside the cover under the battery bays. It would be nicer if they were on the outside of the unit. To get at the switches, take off the back door by loosening the two plastic screws (lots of turning with a coin.) With the unit turned so the screw-holes are on the left, remove the top-most battery if you already have one installed. You'll see two switches with barely readable embossed labels. The left switch says ON-TIME and the choices are 60 seconds (left position) or 20 seconds (right position). I find 20 seconds to be plenty of time for the light to be on, and it saves some battery. The right switch says GLOW and the choices are On (left position) or Off (right position). On gives you a constant low glow when the room is dark. Off gives you no glow, so the unit is dark until you walk near. Off saves battery power. I have both switches in the right position to save power.

When you remove a battery, the flat metal plate to which the spring is attached may pop out, but it's easy to slide it back into its grooves. A minor annoyance.

This product is made in China.

I'd much prefer a warmer, homier light instead of the harsh blue-white light these units emit.

My wishes for this product are for easier settings, warmer light, and made in USA, but otherwise I strongly recommend it.

Wireless Motion Sensor Light - by Wireless Environmrnt - MB530 (White) (3.5"H x 1.8"W x 3"D) Feature

• Color: White
• Size: 3.5"H x 1.8"W x 3"D
• Wireless LED Step Light with Motion Sensor
• Weatherproof, Outdoor or Indoor Use
• 9 ft Motion Range

Wireless Motion Sensor Light - by Wireless Environmrnt - MB530 (White) (3.5"H x 1.8"W x 3"D) Overview

This wireless LED Step Light has a motions sensor, perfect for stairways and hallways. When motion is detected, the motion sensor light comes on brightly and shuts off automatically after your choice of time settings, 30 or 60 seconds. This motion light is weatherproof, so it can be used indoors or out, in the RV, entryway steps or boat dock. It easily attaches to most surfaces with the included double stick adhesive tape, or screws and anchors. Great for illuminating stairs, pathways, hallways, patios and decks. Product Specs: - Motion Detection Range is 9 feet. - Light Coverage: Up to 35 square feet. - 2 Brightness Modes: Glow Mode (optional) turns on when no motion is detected and the area is dark. Bright Mode turns on when motion is detected to safely light up your path way. - Requires 3 C-Cell Alkaline batteries, not included. - Made of shatterproof Plastic. Assembly level/degree of difficulty: Easy.



*** Product Information and Prices Stored: Apr 16, 2010 01:23:19